Operating instructions

e1955
11.1999
31
Siemens Building Technologies
Cerberus Division
Printer B2Q191: paper replenishing
Valid for this system  Yes, system equipped with printer B2Q191
 No printer of this type installed
1
Isolate the printer first
Swing out printer unit
2
Remove the used
paper roll
3
Lift the paper flap and
slide a new paper roll
over the spindle
4
Press the leading edge of the paper
lightly against the flap and feed it into
the printer through the slot.
Push down the release lever A to insert
the paper.
A
5
The paper can be
transported by means of
the knurled wheel
6
Thread the leading edge
of the paper around the
take-up roller and fix it
with the clamp
7
Press the winding up key
De–isolate the printer
Spare paper rolls
Cerberus part no. 379 977 (= 4 pcs.)
or –JUJU TP 50KS-A
–HONSHU PS 65 B1
–MITSUBISHI F-200 U7X
Print intensity
If the print intensity is too low, call the Cerberus service
organization.