Operating instructions

e1955
11.1999
16
Siemens Building Technologies
Cerberus Division
Alarm – what to do ?
AlgoRex
FIREFIGHTER FACILITY
" 'FIRE BRIGADE in 4:31 (min)'
 Alarm will be transmitted in the time indicated
1. Press for each pending alarm message (before time is 0:00)
2. Read the fire location of the 1st alarm in the upper half of the text display field
3. Go to the fire location
4. Decide on «Emergency» or «Minor incident»:
Emergency
: Minor incident:
Immediately actuate nearest Immediately press
manual call point or the key and acknowledge by
’Alarm delay off’ for each pending alarm message
 The alarm message is transmitted  The system reverts to normal operation
" 'Fire brigade REQUESTED'
 Alarm is already transmitted
1. Press for each pending alarm message
2. Read the fire location of the 1st alarm in the upper half of the text display field
3. Go to the fire location
4. Decide on «Emergency» or «Minor incident»:
Emergency
: Minor incident:
Save people Immediately try to stop the fire brigade
Fight the fire Press
and acknowledge by
for each pending alarm message
 The system reverts to normal operation
" 'CALL fire brigade: TEL. 000'
1. Press for each pending alarm message
2. Read the fire location of the 1st alarm in the upper half of the text display field
3. Go to the fire location
4. Decide on «Emergency» or «Minor incident»:
Emergency
: Minor incident:
Immediately call Immediately press
the fire brigade (e.g. TEL. 000) and acknowledge by
 the alarm message is transmitted for each pending alarm message
 The system reverts to normal operation
Fire brigade REQUESTED
............
’FIRE BRIGADE in .... ’
............
’CALL fire brigade: TEL. 000’
............
Top line of display reports status of remote transmission:
2
1 3
2
1
ACK
RESET
3
1
ACK
RESET
3
1
ACK
RESET
3
1
ACK
1
ACK
1
ACK