Operating instructions
e1955
11.1999
12
Siemens Building Technologies
Cerberus Division
Quick reference instructions
How to start operating ?
1. Press
F2
Ü The MAIN MENU is displayed
2. Select desired function in ’MAIN MENU’ by using
the arrow keys
and
3. Then press
ok
Ü option selected is shown inverse
Function ’FIRE detection’
to navigate to a fire detection SECTION or ZONE or ELEMENT (= detector) in order to
isolate or reactivate detector zones
set detector zones on mode ’detector test’ or to terminate ’detector test’ , etc.
Function ’Extinguishing section’
to navigate to an extinguishing SECTION in order to
isolate detector zones related to the selected extinguishing section
set detectors related to the selected extinguishing section on mode ’detector test’ or to terminate
test the extinguishing ’alarm horn’ or ’warning panel’ , etc.
Function ’CONTROL in-/ outputs’
to select a control SECTION or ZONE in order to
isolate or reactivate a fire control function (e.g. air-conditioning shut down, etc.)
initiate manually or deactivate a fire control function, etc.
Function ’GEOGRAPHICAL location’
to select any
SECTION or ZONE in order to
isolate or reactivate a zone, etc.
Function ’DEVICE level’
to initiate a specific function such as
lamp test
printer test, also to isolate or de–isolate the printer, etc.
Function ’LOGICAL address (CSX. no.)’
to jump directly to a known logical location
the complete address (AREA no./ SECTION no./ ZONE no./ELEMENT no.) must be known
Notes
Full list of all possible functions see ’Overview operating menus’ on pages 36 to 41
The text ’MAIN MENU’ is sometimes abbreviated to ’MENU’ because of the limited text length in the display
MAIN MENU
FIRE detection
EXTINGUISHING sections
CONTROL in- /outputs
GEOGRAPHICAL location
DEVICE level
logical address (CSX no.)
ok:select F1:function C:end