User Manual

s
Building Technologies
19-Aug-2010 4848880001B-01-78 Page 2 of 2
Materials
Total weight of device
2983 g
Plastics PA6 Z3B040 winding device
73 g
POM
Paper reel support B1Q 10.
/B2Q 19.
17 g
PVC rigid Card guide
14 g
Metals Steel, zinc plated Front panel B2Q 190/191
882 g
Steel, zinc plated
Card holder B1Q 101/B2Q
191
337 g
Steel, zinc plated Beam B1Q 101/B2Q 191
160 g
Steel, zinc plated Z3B040 winding device
172 g
Steel, zinc plated
Reel
B1Q100/101/B2Q190/191
82 g
Steel, zinc plated
spindle holder, paper guide,
protection and accessoires
45 g
Steel, zinc plated Screws and others
30 g
Others Steel, plastic, motor print device
360 g
PBT GF, Be/Cu, PVC Cable and others
30 g
Paper Paper roll
600 g
PCB assembled
FR4, TBBA, SnPb
Slave for printer
K3L080/B2Q191
181 g
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
Disposal
The device is classified as waste electronic equipment in terms of the European
Directive 2002/96/EC (WEEE) and should not be disposed of as unsorted munici-
pal waste. The relevant national legal rules are to be adhered to. Regarding dis-
posal, use the systems setup for collecting electronic waste.
Observe all local and applicable laws.
Comments
Environmental Benefits:
- Servers for the early detection of fires and prevents the discharge of toxic gases.
- Easily removable. Disassembling is possible without any important effects regarding waste disposal.
Legal disclaimer: This declaration is for information purposes only
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee
that the product will retain a particular composition for a particular period.
Siemens Switzerland Ltd therefore does not assume liability for any error or for any consequences which may arise from the use of
this information to the maximum extent under the law.
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.