User's Manual

User Manual for AyAlarm AyTerminal
V2.1 AyAlarm application
2Quick instruction / reference
2.1Device description
The detailed device description you find in chapter 3.1.
The major parts are:
• Display (OLED display):
Used for information screens and for input screens.
There are 2 display modes: standard mode and jumbo mode (big-sized characters)
See chapter 3.1.9.
• Navigation buttons:
4 touch sensor buttons around the display:
- arrow up: up button
- arrow down: down button
- right button: Enter button
- left button: Cancel button
The display also represents a button (center button)
See chapter 3.1.5.
• Status LED:
provides feedback about the current AyTerminal status
See chapter 3.1.2.
2.2Getting started
• Insert SIM card and battery
See chapter 4.
• Turn on the device: press the central button for 2 seconds.
The loading screen will be displayed.
See chapter 4.2.1.
• Enter the PIN of the SIM card.
Select the OK option and press the Enter button (right button).
See chapter 4.2.3.
• Select the AyAlarm application and press the Enter button.
• Optional:
Define the deactivation code (sequence of 4 buttons, default: up button, right button, down
button, left button)
Definition via Settings > AyTerminal > AyApplication > Deactivation code
See chapter .
• Select the AyAlarm mode you want to start and press the Enter button.
If a mode is set to auto start, this mode will be started automatically.
See chapters 5.2 and 5.3.
2.3Configuring the AyAlarm modes
The detailed device description you find in chapter 5.4.
• Alarm clock:
Activation Time (see chapter 5.4.1)
Autostart (see chapter 5.4.2)
Notifiers (see chapter 5.4.3)
Alarm time
Duration (see chapter 5.4.5)