User's Manual

User Manual for AyAlarm AyTerminal
V2.1 AyAlarm application
5.5Activating/Starting a mode
A configured mode can be started by choosing “Start” in the mode menu. If the Activation time is
checked the mode is first going in idle status and is activated at the specified time. Else the mode
is activated immediately when “Start” option is chosen.
Idle Active
Mode started
Or
Autostart enabled
Activation start time reached
or
Activation time deactivated
Off
Activation end
time reached
Deactivation sequence
entered
Deactivation sequence
entered
Alarm
Alarm triggered
Alarm Duration
Time passed
Deactivation sequence
entered
Mode activated (activation
time disabled)
Or
Start time met (activation time
enabled)
Figure 5-50 Mode states
With the Start option the selected mode of the AyApplication can be started. When a mode is
started this takes the control over the display and the user input.
If no alarm trigger is active the mode is not started and a message box is displayed informing
about this status.
No alarm trigger
activated. Mode
not started.
No alarm
trigger
activated.
Figure 5-51 No alarm trigger activated message box
If no notifier is activated and the mode is started, first a message box is displayed for 5 seconds
and then the mode is started (if possible).