User's Manual

User Manual for AyAlarm AyTerminal
V2.1 AyAlarm application
Figure 3-5 Current AyTerminal design.
3.1.5.1Navigation through the menu structure
In a menu layout the first menu item is selected by default. Another item can be selected by
pressing up/ down button.
Depending on the selected menu item pressing the right button will:
• Accept the selection
• Select/ Unselect/ Check/ Uncheck the item (if a radio button or a check box is displayed in
front of the item)
To go back to the previous menu level the left button has to be pressed.
3.1.6Speaker
The speaker of the AyTerminal is used for GSM voice calls and for providing an acoustic feedback.
For the following use cases an acoustic feedback is provided:
• On navigation button click
• On AyApplication specific triggering of a predefined alarm tone
• On AyApplication specific triggering of predefined acknowledgment tones
• On incoming voice calls with predefined ring tones
3.1.6.1Acknowledgement tones
There are positive and negative acknowledgment tones: one beep indicates a positive
acknowledgment, two beeps a negative acknowledgment. The table below lists the
acknowledgment use cases:
Event
Positive
(one beep)
Negative
(two beeps)
FW download Yes, download accepted No, download rejected
To many AySnapOns No Yes
Entering PIN Yes, successfully No, incorrect PIN
Entering PUK Yes, successfully No, incorrect PUK
New AySnapOn connected,
Search item selected
Yes, found No, not found
Table 3-3 Positive and negative acknowledgment for some events
Entry touch button
(OK)
()
Left touch button
(Back)
Up button
Down touch button
Display and central button