User's Manual

User Manual for AyCare AyTerminal
V2.1 AyCare application
available ones: up, right, down, left, central. After entering the new deactivation code (pressing a
code of 4 buttons) a message box is displayed informing about the new set deactivation code. The
new code can be accepted or rejected using the right or left button.
**
Code setup
**
Code setup
Figure 4-66 Code setup editor (standard and jumbo mode)
The deactivation
code is: up, right,
Down, left.
Confirm?
The
deactivation
code is: up,
right,
Figure 4-67 Confirmation request
If confirmation is rejected then the new deactivation code is not saved.
4.8.7.2PIN control
Using this menu item it is possible to activate or deactivate the SIM PIN request on start up. PIN
control is activated by default. For activating or deactivating the SIM PIN request, the PIN has to be
entered in the PIN editor screen first (see Figure 3-12).
4.8.7.3Changing the PIN
Using this menu it is possible to change the SIM PIN.
First the old PIN is requested, then the new PIN and re-enter it for security reasons is requested.
According to GSM specifications the PIN can be up to 8 digits long. The PIN must have at least 4
digits.
***_
Old PIN
9
2
1
0
***_
New PIN
9
2
1
0
***_
Re-enter PIN
9
2
1
0
Figure 4-68 Change PIN screens – standard mode
***_
9
1
0
Old PIN
***_
9
1
0
New PIN
***_
9
1
0
Re-enter PIN
Figure 4-69 Change PIN screens – jumbo mode
Page 45 / 50