User's Manual

User Manual for AyCare AyTerminal
V2.1 AyCare application
Sync Now
successfully
completed.
Sync Now
successfully
completed.
Figure 4-48 Sync Now – message in case of successfully completed synchronization
Sync Now failed.
Sync Now
failed.
Figure 4-49 Sync Now – message in case synchronization fails
4.8.2AySnapOn
The “AySnapOn” menu provides the ability to:
• search for new AySnapOns that are connected to the AyTerminal
• view all found AySnapOns
In the list of found AySnapOns it is possible to:
• activate or deactivate each AySnapOn
AySnapOn
Search
AyCAMERA
AyGPS
AySnapOn
View
AyGPS
Figure 4-50 AySnapOn menu – standard and jumbo mode
If more than four AySnapOns are found during the search process a message is shown on the
display. Additionally the status LED will blink red and a negative acknowledgment is sounded. The
maximum four AySnapOns are allowed be connected to one AyTerminal. The list of connected
AySnapOns is not available if more than four AySnapOns are connected.
Too many
AySnapOns
connected!
Too many
AySnapOn
connected!
Figure 4-51 AySnapOn warning message – standard and jumbo mode
An AySnapOn can only be activated if the running application supports this AySnapOn.
It is forbidden to plug or unplug AySnapOn modules to/from AyTerminal while AyTerminal
is powered on. It needs to be powered off first.
Page 39 / 50