User's Manual

User Manual for AyCare AyTerminal
V2.1 AyCare application
Panic Butt
Start
Autostart
Activation
Panic Butt
Notifiers
Overview
Start
Figure 4-35 Settings menu in Voice Call mode (standard and jumbo mode)
AyCare is using only the noise sensor from the three AyTerminal sensors. For setting the noise
threshold value the noise calibration screen is shown. This screen contains the following
information:
• Currently measured sensor value
• Current threshold value
• Additional text to describe the shown values (see Figure 4-20)
(see 4.4.4.2)
v1
curr.:
v2
Noise
72
curr.:
10
Noise
Figure 4-20 Noise adjustment screens
4.4.4.1Listen-in
Note! Listen-In is a feature not a trigger. It appears in triggers menu because it can be activated/
deactivated and its parameters can be changed.
The menu is provided for setting the Listen-In parameter values:
Listen-in
Active
Phone numbers
Listen-in
Phone nu
Active
Figure 4-36 Setup Listen-In trigger
The options in the Listen-in setup menu are: Active with a check-box in front, and Phone numbers.
After selecting the Phone numbers menu item a menu with all 10 defined phone numbers is
shown.
Phone numbers
<phone no1>
<phone no2>
<Enter Nr.>
<Enter Nr .>
Phone num
<phone no
<phone no
<Enter Nr.>
Figure 4-37 Phone numbers list
Page 33 / 50