User's Manual

AyTerminal User Manual for AyCare
Contents V2.1
• connect a Siemens standard headset and use it for GSM voice calls.
• connect the AyTerminal charger for charging the AyTerminal battery.
2.1.4AySnapOn connector
This connector is used to connect up to four AySnapOns.
2.1.5Navigation buttons
The navigation buttons provide the input possibility for the AyTerminal user.
There are 4 touch sensor buttons around the display for the following navigation purposes:
• Arrow up – up button
• Arrow down – down button
• Back button – left button, Cancel button
• OK button – right button, Entry button
Additionally, the display itself is a mechanical button (startup the AyTerminal/application specific
purpose).
For the central button the AyTerminal can distinguish between single click, double click, and long
button press.
Figure 2-5 Current product design of the AyTerminal.
2.1.5.1Navigation through the menu structure
In a menu layout the first menu item is selected by default. Another item can be selected by
pressing the up or down buttons.
Depending on the type of the selected menu item, pressing the right button will:
Page 10 / 50
Acceptance touch button
Cancel tough button
Up touch button
Down touch button
Display and central button