Operation Manual

5
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX72_Pegasus_DTC\out-
left page (5) of AX72 Pegasus-DTC, SUG, en, A31008-H2860-A1-2-7619 (04.10.2005, 10:58)
VAR Language: en; VAR issue date: 050307
Accept call
The phone must be switched on (standby
mode). An incoming call will interrupt
any other use of the phone. Press
§Answer§
or A.
Please make sure you have accepted the call
before holding the phone to your ear. This will
avoid damage to your hearing from loud ring
tones!
Handsfree
You can put the phone aside during a call.
You can then hear the caller via the
loudspeaker.
Activate handsfree function with
§Handsfr.§
and switch on with
§Yes§.
Adjust the volume with
E. Pressing
§Handsfr.§ switches off "handsfree talking".
Always switch off "handsfree talking" before
holding the phone to your ear! This will avoid
damage to your hearing!
Swapping between 2 calls b
Make a new connection during a call
with
y menu§ ¢ Hold ¢ J(dial
a new phone number). With
y menu§
¢ Swap you can swap back and forth
between both calls.
If you are called during a phone call and
you can hear the "call waiting tone", you
can accept the waiting call with
§Swap§,
putting the current call on hold to do so.
Direct call
If this is active, only one number can be
dialled.
§Menu§ ¢ m ¢ Security ¢ Direct call
Press
D and enter phone code. The
phone code (4- to 8-digits) is set by you
and entered at the first security setting.
Please note this code down (see also p. 4)!
Confirm code input with
§OK§.
To dial, press and hold the right soft key.
To switch direct call off, press and hold
.
Enter phone code and confirm with
§OK§
.
Press
§Change§ and Confirm Off with §OK§.
Text entry
Text entry without T9
Press number key repeatedly until the re-
quired letter appears. After a brief interval
the cursor will advance. Example:
2
Press once briefly to type the let-
ter a, twice to type b, etc. Press
and hold to write the number.
Ä,ä,1-9 Umlauts and numbers are dis-
played after the relevant letters.
§Clear§ Press briefly to delete the letter
before the cursor, press and hold
to erase the whole word.
H
/G
Move the cursor
(forwards/back).

Press briefly: Swap between abc,
Abc,
T9
abc,
T9
Abc,
T9
ABC, 123.
Status shown in top line of
display.
Press and hold: All inputvariants
are displayed.
*
Press briefly: Special characters
are shown.
Press and hold: Open input
menu.
0 Press once/repeatedly:
. , ? ! ’ " 0 - ( ) @ / : _
Press and hold: Writes
0.
1
Writes blank. Press twice =
jumps a line.
Input menu
Press and hold* with text input. The input
menu ist displayed:
Text format (SMS only), Input language, Mark
text, Copy/Add