User Manual

CE2B2463en AUD3 20.02.2008
You want to cancel all settings
Press the Reset button.
You want to reenter a 24-hour program
For each heating period, you need to set:
− The time for switching over from REDUCED/PRO-
TECTION to NORMAL (display
)
− The time for switching over from NORMAL to
REDUCED/PROTECTION (display
)
Before entering the 24-hour program, write it down!
1. Move the red slide switch to
.
2. -.-- and
appear.
3. Press buttons of the weekdays on which the 24-hour
program shall be used (to cancel the selected week-
day again: press button again).
4. Press button
or to set the required switchover
time from REDUCED/PROTECTION to NORMAL.
5. Press the Set button.
6. -.-- and
appear.
7. Press button
or to set the required switchover
time from NORMAL to REDUCED/PROTECTION.
The display starts changing at the value previously
set.
8. Press the Set button.
9. Enter additional heating periods, if required.
10. Reset the red slide switch to
.
You are going on holiday
1. Set the red slide switch to .
2. - h and
or appears.
3. Press the
button to select the required tempera-
ture:
for NORMAL, for REDUCED/PROTECTION.
4. Press buttons
and to enter the required holiday
period:
For one day: the number of hours
Display example: 12 h for 12 hours
For two and more days (max. 7): the number of
days. The current day must also be included!
Display example: 14 d for 14 days
5. Set the red slide switch to
. The display or
flashes.
At the end of the holiday period, the 24-hour program will
be resumed.
Returning to the 24-hour program prematurely:
1. Set the red slide switch to
.
2. Press button
until - h appears.
3. Set the red slide switch to
.
You do not want to heat according to the 24-
hour program for a certain period of time
1. Set the red slide switch to .
2. - h and
or appear.
3. Press button
to select the required temperature:
for NORMAL, for REDUCED/PROTECTION.
Returning to the 24-hour program:
Set the red slide switch to
.