Operating Instructions

Manual Organzation
Siemens Building Technologies, Inc. V
How To Use This Manual
This manual is written for the owner and user of Siemens Building Technologies Actuating
Terminal Equipment Controller—Electronic Output, referred to as ATEC for the remainder of
this manual. It is designed to help you become familiar with the ATEC and its applications.
This section covers manual organization, manual conventions, symbols used in the manual,
and other information that will help you use this manual.
Manual Organzation
This manual contains the following chapters:
• Chapter 1, Hardware, describes the hardware components and the accessories that
are used with the ATEC.
• Chapter 2, Applications for ATEC—Base VAV, describes the control applications
available in the base model of the ATEC. Point maps, complete with slopes and
intercepts, are included for each application.
• Chapter 3, Applications for ATEC—VAV with Reheat, describes the control
applications available in the model of the ATEC that includes a terminal block for
wireable input/output connections. Point maps, complete with slopes and intercepts,
are included for each application.
• Chapter 4, Point Database, defines the point database descriptors and includes
address and applications.
• Chapter 5, Troubleshooting, describes basic corrective measures you can take
should you encounter a problem when using the ATEC. For issues not covered in this
chapter, consult your local Siemens Building Technologies, Inc., representative.
• The Glossary describes the terms and acronyms used in this manual.
• The Index helps you locate information presented in this manual.