Installation Instructions

Installation Instructions
Document No. 545-431
February 4, 2003
FLN Controller 115 Vac/230 Vac
Plug-in Power Supplies
Item Number: 545-431-02, Rev. 010 Page 1 of 2
Product Description
FLN Controller plug-in power supplies provide the
required 12 Vdc power to the Controller Board.
NOTE: Refer to the Smoke Control Application
and Engineering Manual (125-1806) for
further information about the system
installation and programming constraints:
Product Numbers
545-132 FLN Controller Plug-in Power Supply,
115 Vac
545-136 FLN Controller Plug-in Power Supply,
230 Vac
Power Input Requirements
• FLN Controller Power Supply, 115 Vac,
500 mA (minimum) 60 Hz
• FLN Controller Power Supply, 230 Vac,
500 mA (minimum) 50 Hz/60 Hz
Caution Notation
CAUTION:
Equipment damage or loss of
data may occur if you do not
follow a procedure as specified.
Required Tools
None
Expected Installation Time
1 minute
Prerequisites
• FLN Controller enclosure (115 Vac P/N 545-
791; 230 Vac, P/N 545-792) mounted on wall.
• FLN Controller Board (P/N 545-793) installed.
Instructions
CAUTION:
To avoid equipment damage, be sure
that the Controller Board’s power is OFF.
1. Unpack the power supply from the box.
2. Insert the DIN plug into the DIN socket on the
Controller Board labeled 12 Vdc (Figure 1).
FLN0020R1
Figure 1. 12 Vdc Power Supply
Connection to Controller Board.