Manualshelf

User Guide

ManualsBrandsSiemens ManualsBuilding automationAPOGEE Wiring Guidelines for Field Panels and Equipment Controllers
919293949596979899100
Chapter 10 - Create/Edit
Point Editor Application
92
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
3. To select the desired PTEC device, click the arrows next to the supervising panel
name and next to its FLN name, and then click the PTEC device name in the left
pane of the Point Editor window. When you select a PTEC device, the object list
indicates the ability to select the Custom Point Table. Select the Custom Point
Table object.
The PTEC Point Editor table displays all custom points (user-defined BACnet
objects) in the PTEC device.
Modifying a Point for Panel on ALN or UEC/PANEL on FLN
1. Select the Point icon from the Create/Edit bar.
The Point Editor window will open.
2. If no panels/devices display, click Select a Device at the top of the left pane of the
Point Editor window displays available panels/devices.
3. Select the desired panel/device and the desired point device by clicking the arrow
next to the panel name to display devices, and then clicking the device name in the
left pane of the Point Editor window.
The point information window displays point details.
4. Make the desired modifications to the existing point.
5. Click Save.
The
Save button is unavailable once the modifications are complete.