User Guide

Chapter 7 - Reporting
Point Log Report Application
55
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
● The Panels drop-down allows you to choose the panel(s) within which to run the
Point Log report.
● The
Name field allows you to search on the point name, using wildcard characters
if necessary.
● The
Type drop-down allows you to choose the type of point on which to run the
Point Log Report.
● The
Search BACnet FLN check box determines whether or not the report will
include MS/TP points.
● The
Go button runs the report.
● The
Cancel button cancels the report.
● The
Status Filters check boxes allow you to filter the report based on the status
options (In-Alarm, Fault, Out of Service, Overridden, and Unacknowledged Alarm).
See the
Running a Point Log Report section for more information.
● The
Print button allows you to print the report.
● The
Export to CSV button allows you to export the report data to a comma
separated values (CSV) file which can be saved.
Running a Point Log Report
1. To generate a Point Log report, click the Reporting
bar in the left navigation pane, and then click
the Point Log Report icon.
 A report pane displays and allows filter selection.
2. Select the desired panel by clicking the panel name in the Panels drop-down field.
 When a panel is selected, a check mark
displays in front of the panel
name.