User Guide

Chapter 5 - Point Commander Application
Point Commander Application Overview
46
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
Figure 3: Example of OTHER Error Feedback Message.
Tips for Using the Point Commander Application
● Points can be commanded from the Navigation pane or from an animated graphic.
See the
FINlite Graphics Tool [➙ 220] section for information on commanding a
point from a graphic.
● You can only command points if you have been given Command or higher access
level to the point.
– Analog, digital, and multistate points can be commanded.
– Generally, only output points (AO, BO, and MSO) or virtual points (AV, BV,
MSV) with a priority array can be commanded; other points such as AI and BI
points may be commandable if taken out of service first.
● If the same point is commanded from two different sessions, the command with the
higher priority will override. If the commands are made with the same priority, the
last command will override the earlier command.
● Multi State Input Object (MSI) points are currently not supported.