User Guide

Chapter 4 - Status Bar
Status Bar Counts and Reports
37
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
Chapter 4 - Status Bar
Figure 1: BACnet Field Panel Web Server Status Bar.
Chapter 4 discusses the following topics related to the Status Bar:
● Status Bar Counts and Reports [➙ 37]
– Running an Alarm Report [➙ 37]
– Acknowledging an Alarm [➙ 38]
● Setup [➙ 38]
● Logoff [➙ 39]
Status Bar Counts and Reports
Running an Alarm Report
Alarm details can be viewed in the Alarm report, which is accessible using the Status
Bar (see the
User Interface after Logon [➙ 27] section for more information about the
Status Bar and its features). An Alarm report lists the details of both Event Enrollment
alarms and Intrinsic Alarms.
Alarms can be acknowledged from the Alarm report. Acknowledging the state of an
object does not refresh the report. The report must be re-run by clicking the Count
button to see updated data.
 To run an Alarm report:
1. Click the Alarms button in the Status Bar.
 An Alarm report displays, listing alarm details.
2. Select the date and time in the Event Time column to see event time and
acknowledge time details.
3. To close the Alarm report, click the X button to close the Report tab.