User Guide

Chapter 3 - User Interface Navigation

Common Editor Fields and Buttons

Siemens Industry, Inc.

BACnet Field Panel Web Server User Guide

125-3584

2017-07-31

For instance, if you want to create a Binary Value object with an instance of 100, you

would enter the following in the Point Editor Object Identifier:

Upon successful creation of this object, the Object Identifier field will show both

components:

The Object Identifier field cannot be modified after creation.

Object Reference

Some BACnet objects have properties that reference other BACnet objects.

For instance, an Event Enrollment object has a

Reference Point field. This field can be

filled by selecting the drop-down arrow, and selecting an object from the list, or by

selecting the

? (question mark) button and manually entering an Object Reference.

The drop-down arrow option:

The ? (question mark) button option:

Manually entering an Object Reference requires entering the instance of the Device

Object containing the desired object, and the Object Identifier of the desired object.

The above picture indicates a reference to a Binary Value object with instance 100, on

a Device with instance 1021.

Manually entering the Object Reference is required if the reference object is located in

a non-FPWeb-enabled panel or a non-FPWeb-enabled panel’s associated FLN device.