User Guide

Chapter 3 - User Interface Navigation
User Interface after Logon
32
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
Dynamic Icons
Dynamic icons in the Device/Points bar indicate the various states of the panel node. A
dynamic icon associated with a panel node is updated when a change to the state of
the panel is detected.
Icon
Description
Indication
Yellow triangle icon with
a red exclamation point
displayed on an ALN
device.
Database File Synchronization.
Field panel database file synchronization is in progress.
A status message displays. See the
Pending Database
File Synchronization
section for more information.
Orange triangle icon
with a white
exclamation point.
Panel Not Ready.
● When displayed on an ALN device, indicates that the
panel is not ready. You must load the panel with a
database from a software tool or front end computer,
or use the Panel Configuration Editor to make the
panel ready.
● When displayed on an FLN device indicates that the
application status is failed.
Red triangle icon with a
black exclamation point.
Panel Communication Lost.
Communication to the device has been lost (device
failure).
Application Area User Interface
The application area shows the output of the current active application. The information
displayed in the application area depends on the application being used. See the
specific application section for more information.
When an application is started from the Navigation Pane, either an application window
will open on the right side, or an application tab will be open on the right side.
Point Commander and Password Reset open in an application window. All other
applications open in tabs.
NOTE:
In the Web Server user interface, it is recommended to limit the total number of
graphic tabs and dynamic trend tabs that are open to six (6) for performance reasons.
After a successful logon, the Application Area will either be blank or loaded with the
“Default.fnl” graphic file loaded in a Graphics View application tab. See the
FINlite
Graphics Tool
section for more information about the default graphic.