User Guide

Chapter 3 - User Interface Navigation

Siemens Industry, Inc.

BACnet Field Panel Web Server User Guide

125-3584

2017-07-31

Configuring the Login Page Graphic

BACnet Field Panel Web Server provides a Login Page image, which you can change.

To change the image on the Login Page:

1. Create a custom image file that is 398 × 263 pixels.

2. Name the file login.png.

3. Save the file to a USB drive.

4. Do one of the following to save this file in the field panel:

– Using the USB drive as Drive

B of the field panel, copy the login file to

A:/wsroot/login.png. For the HMI command prompts to perform the file copy,

see Chapter 13 -

Field Panel Features for BACnet Field Panel Web Server

[➙ 249] in this document.

– Using the USB drive as Drive

B of the field panel, save the file to the WSROOT

subdirectory in the

UIUpgrade directory, along with the standard contents of the

UIUpgrade folder. Perform the UIUpgrade, using the HMI command prompts.

The login file will be transferred properly to the correct folder in both Drive A

and the

IFD drive. For the HMI command prompts to perform the file copy, see

Chapter 13 -

Field Panel Features for BACnet Field Panel Web Server

[➙ 249]

in this document.

– Use File Transfer Protocol (FTP) to save the file to

WSROOT.

NOTE:

The

the file to the Internal Flash Drive (IFD) (

IFD:\wsroot\login.png) so that the file is

preserved after a coldstart.

 The custom image will display on the Login Page. If the login.png file is not in the

WSROOT directory, the default Login Page image displays.