User Guide

Chapter 13 - Field Panel Features for BACnet Field Panel Web Server
Backing up and Restoring Databases
257
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
05/11/2011 WED File Directory 12:13
Path: IFD:\
04/24/2009 14:06:28 7580 FieldPanel.xml
03/01/2010 14:45:26 328 LicenseVault.xml
wsroot\Graphics\MEDIA\VALANIMATION1\THERM0.JPG
05/11/2011 11:18:53 5600
wsroot\Graphics\MEDIA\VALANIMATION1\THERM10.JPG
05/11/2011 11:18:54 5601
wsroot\Graphics\MEDIA\VALANIMATION1\THERM20.JPG
05/11/2011 11:18:56 5620
End of report
>List_drives, Set_drive, listDirectory, Change_dir, File_ops,
Remove_dir, Quit? f
>Copy_file, Rename_file, Move_file, Delete_file, Quit? d
>File name : wsroot\Graphics\MEDIA\VALANIMATION1\*.*--
>Are you sure : Y
Deleting wsroot\Graphics\MEDIA\VALANIMATION1\THERM0.JPG...
Deleting wsroot\Graphics\MEDIA\VALANIMATION1\THERM10.JPG...
Deleting wsroot\Graphics\MEDIA\VALANIMATION1\THERM20.JPG...
deleted successfully.
Backing up and Restoring Databases
The Auto Save feature initiates an automatic backup of the database after a period of
15 minutes, after the database has been modified. The Auto Restore feature restores
the database at start up.
When Web Server is enabled on a panel, Auto Save and Auto Restore are enabled as
the default. You can manually disable them using the HMI.
NOTE:
If you are using Insight software as a mass storage device, do not enable Auto
Restore in Web Server. If Auto Restore is already enabled, it must be manually
disabled.
For more information, see the Enabling Auto Save section and the APOGEE BACnet
ALN Field Panel User's Manual
(125-3020).