User Guide

Chapter 12 - FINlite Graphics Tool
Using the FINlite Graphics Tool
235
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
To create a Graphics file:
1. Click the Components menu in the left navigation pane of the Graphics Application
window.
2. To assign an object to the component, click the arrows next to the panel and
objects names in the navigation pane to navigate to the desired object from the
object list in the left pane and drag it on top of the component that has just been
dropped onto the canvas.
3. Once all the desired components have been added to the canvas, click the Enter
Live Mode button in the upper right corner of the window, above the canvas. This
allows the panel to begin polling points and displaying current information on the
graphic.
NOTE: While in live mode you can open the Commander application and command the
objects to see the graphic being manipulated. However, if a PPCL program or any
other application is influencing the object, the change will be seen without any user
interaction such as using the Commander application.
To Publish a Graphics File:
1. From the File menu, select Publish.
2. Open the BACnet Field Panel Web Server user interface.
3. In the left Navigation pane, click either the Devices/Points bar or the Graphics bar.
4. Navigate to the panel where the graphic was published.
 The published graphic will display under the panel name.