User Guide

Chapter 3 - User Interface Navigation
Login Page
23
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
Chapter 3 - User Interface Navigation
Chapter 3 discusses the following topics:
● Login Page [➙ 23]
– Configuring the Login Page Graphic [➙ 26]
● User Interface after Logon [➙ 27]
– Navigation Pane User Interface [➙ 28]
– Device/Points Bar Icons and Messages [➙ 30]
– Application Area User Interface [➙ 32]
– Device/Points Navigation Tree [➙ 33]
● Common Editor Fields and Buttons [➙ 34]
Login Page
If you have problems connecting to the BACnet Field Panel Web Server or logging
on, see the
Troubleshooting section.
Landing Page
When you begin a BACnet Field Panel Web Server session with a Web browser URL
request to the field panel, using either its IP address or panel name/Fully Qualified
Domain Name, the Landing Page displays. The Landing Page allows you to log onto
any of the Web Services installed on the field panel.
● If only one Web Service is installed on the field panel, such as the FPWeb UI Client
or the FINBuilder KIOSK, the Login Page for that service displays.
● If any combination of Web Services are installed on the field panel, the appropriate
buttons display on the Landing page, allowing you to log into any of the installed
services.
● If no Web Services are installed on the field panel, one of the following messages
displays:
– For a PXC-16 or PXC-24:
“This Field Panel only provides FPWeb Services. Please log
onto a FPWeb Server.”
– For a PXC Modular or PXC-36:
“This Field Panel does not have any Web Applications
installed. It is currently operating as a Web Services
only device. Please install one of the available Web
Applications or connect to another panel.”