User Guide

Chapter 11 - System Configuration
Database Manager
198
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
 Message displays indicating success or failure.
7. Click OK.
 The Select a Device screen displays, which allows you to see the current state
of the system.
 The affected supervising panels learn the base application.
Custom Application Management Error Handling
Compatibility
Database Manager requires Firmware Revision 3.3 or later on all ALN devices.
Database Manager requires Firmware Revision 3.3 or later on all UEC/PANEL FLN
devices.
A UEC/PANEL FLN device with an earlier firmware revision cannot successfully be
selected as the source of an Application database. If the correct version of firmware is
not loaded in the UEC/PANEL FLN device source, the following error message
displays:
A UEC/PANEL FLN device with an earlier revision of firmware cannot successfully be
selected as the destination of an Application database in Database Manager. If such a
device is in the destination list, this device will be left in the Application Failed state.
NOTE:
It is recommended that you change the default passwords for the HIGH and MED
accounts before upgrading to Firmware Revision 3.3.
Device Ready
Point Editing, PPCL Editing, and database management of UEC/PANEL FLN devices
requires the UEC/PANEL FLN device to be made ready. If the UEC/PANEL FLN is not
made ready, the following error message displays:
Device Password
As described in the FLN Editor section, the device reference for a UEC/PANEL must
include the password for the HIGH user account that is stored in the UEC/PANEL
device database in all uppercase. If the device reference for a UEC/PANEL is not
correctly entered, the following error message displays: