User Guide

Chapter 11 - System Configuration
FLN Editor
170
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
5. Do one of the following:
– Select the
ALL check box to select all devices in the table to be added to the
database.
– Select the check box for individual devices to be added to the database.
6. Enter or modify any device information. For more information, see the User
Interface Description for FLN Device Discovery [➙ 165] section.
NOTE: A field with an invalid entry displays a red border. Move your cursor over
the field to display the valid entry parameters.
7. Click the Add Selected button to add all selected devices to the panel database.
NOTE:
Before adding a UEC to the database, the UEC must be made ready.
If device discovery is in progress, the Refresh List button is available. To refresh the
list of discovered devices, click the
Refresh List button at the bottom of the pane.
CAUTION
Changes made to the Device Discovery table are overwritten when you click the
Refresh List button. Before refreshing the list, click the Add Selected button to add all
selected devices to the database.
Restarting Device Discovery
Selecting the
Restart Discovery button triggers a new discovery process and updates
the list to include any changes to the physical network. The
Restart Discovery button is
available if discovery is complete.
To restart the device discovery process:
1. Click the Restart Discovery button in the bottom right corner of the Device
Discovery pane.
– If the field panel has Firmware Revision 3.4 or later, you can enter a range of
instance numbers to filter the discovered list and reduce the impact to panel
performance.
 A
Discover Devices dialog box displays.
2. Click Yes to continue.