Manualshelf

User Guide

ManualsBrandsSiemens ManualsBuilding automationAPOGEE Wiring Guidelines for Field Panels and Equipment Controllers
11121314151617181920
Chapter 2 - BACnet Field Panel Web Server System Administration
Loading the User Interface
17
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
3. At the HMI prompt, type S, H, E, W, U (System, Hardware, Ethernet, Webserver,
Uiupgrade).
4. When prompted, type Y (Yes) and press ENTER.
The User Interface and support files will be installed from the USB memory device
in the field panel’s Drive
B to the field panel’s internal flash drive (IFD) and to the
field panel’s Drive
A.
Alternate Method: Loading or Upgrading the User Interface through File
Transfer Protocol (FTP)
There are many user-friendly FTP tools publicly available that can be used for
transferring files between your computer and the field panel.
Telnet must be enabled in order to use FTP. Remember to disable Telnet on the field
panel when you are done using the Telnet and FTP services. For information on
enabling Telnet, see
Troubleshooting
.
Telnet must be enabled in order to use FTP. Once the upgrade is complete, you may
disable Telnet on the field panel. For information on enabling Telnet, see the
APOGEE BACnet ALN Field Panel User's Manual
(125-3020).
Complete this procedure to load or upgrade the User Interface file through FTP
(alternate method; using Launch Pad is recommended).
1. Use FTP to copy the UIUpgrade folder and its contents from Standard
Apps/Partner Extranet or your computer to the root of Drive A: on the field panel.
2. Do one of the following:
– At the HMI prompt, type
S, H, E, W, U
(
System/Hardware/Ethernet/Webserver/Uiupgrade)
– Use FTP to transfer the
UIupgrade.txt file from Standard Apps/Partner Extranet
or your computer to the root of Drive
A: on the field panel.
The User Interface and support files will be installed from the field panel’s
A:\UIupgrade folder to the field panel’s internal flash drive (IFD) and to the field
panel’s
A: drive.
Files stored in the IFD are preserved when a field panel restarts.
After the upgrade is complete, the field panel’s
A:\UIupgrade folder is automatically
removed.