User Guide

Chapter 11 - System Configuration
FLN Editor
165
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
6
English Units check box - When selected, the English (US) units rather than SI
units are displayed. This check box cannot be edited in existing devices.
7
The Duct (Y/N) check box - (“Duct is present”) Allows you to indicate whether
or not a duct is present.
8
The Duct Type drop-down menu - Allows you to select the duct type
(Rectangular, Circle, Oval). When a duct type is selected, the
Duct
measurement fields display so that you can provide the duct measurements for
the selected duct type.
● Rectangle:
Duct size height and Duct size width fields display.
● Circle:
Duct size diam field displays.
● Oval:
Diam before flat and Height of flat fields display.
9
Night Override - Allows you to define the override time.
User Interface Description for FLN Device Discovery
Device discovery is available through the FLN Editor. If the selected field panel has
been enabled for MS/TP FLN and has Firmware Revision 3.3 or later, the
Discover
Devices button displays at the bottom of the FLN Editor device tree pane.