User Guide

Chapter 10 - Create/Edit
PPCL
146
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
● You cannot drag a point into a PPCL program in the UEC unless the point is from
the same UEC as the PPCL program.
● When a point is dragged from a UEC into a PPCL program in the same UEC, the
Name will be dropped into the line of PPCL.
● You cannot drag a point into a PPCL program in the PTEC unless the point is from
the same PTEC as the PPCL program.
● When a point is dragged from a PTEC into a PPCL program in the same PTEC, the
Name will be dropped into the line of PPCL.
● A “No Drop Allowed” indicator
displays for all prohibited drops.
CAUTION
Resident Points (that is, !DeviceName:PointName ) used in PPCL programs will retain
their DeviceName through a replication.
If replicating a UEC database to multiple devices, you must manually update the
DeviceName for these points in the replicated PPCL Program.
Name/System Name
The term "Name" refers to the information in the
Name: field that displays when you
move your cursor over the point in the Devices/Points list. This is the name that is used
when referring to that point in a PTEC’s or UEC’s PPCL program.
The term "System Name" refers to the information in the
System Name: field that
displays when you move your cursor over the point in the Devices/Points list. This is
the name that is used when referring to that point in a Field Panel’s PPCL program.
These are different concepts from System Name/Name as they appear in Insight,
Commissioning Tool (CT) Point Editor, or in the point definition display of a point at
the HMI.