User Guide

Chapter 10 - Create/Edit
PPCL
139
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
Command Menus for Field Panels and UECs
Program
Control
Point
Control
Operational
Control
Emergency
Control
Energy
Management
Special
Function
Arithmetic
Function
ACT
DEACT
ENABLE
DISABL
GOSUB
GOTO
ONPWRT
RETURN
SAMPLE
IF/THEN/ELSE
ON
OFF
FAST
SLOW
AUTO
SET
INITTO
WAIT
STATE
ENALM
DISALM
LLIMIT
HLIMIT
EMON
EMOFF
EMFAST
EMSLOW
EMAUTO
EMSET
RELEAS
DAY
NIGHT
DC
DCR
TOD
TODMOD
TODSET
HOLIDA
SSTO
SSTOCO
PDL
PDLDAT
PDLMTR
PDLSET
PDLDPG
LOOP
ADAPTM
ADAPTS
DBSWIT
DEFINE
LOCAL
MAX
MIN
TIMAVG
TABLE
OIP
ATN
COM
COS
EXP
LOG
.ROOT.
SIN
SQRT
TAN
NOTE: The ALMPRI and TOTAL commands can be manually entered into a line of
PPCL, but they are not accessible through the Command Menus or the PPCL Assist
Forms.
Command Menus for PTECs
Program
Control
Point Control
Emergency Control
Energy Management
Special
Function
GOTO
IF/THEN/ELSE
ON
OFF
SET
INSERVICE
OUTOFSERVICE
RELEAS
LOOP
DBSWIT
MAX
MIN
TABLE
Commands Supported by PTECs Only
OUTOFSERVICE
The OUTOFSERVICE command is used to place a point out of service. After a point
has been placed OUTOFSERVICE it is possible to assign a value to that point. You
can place up to 16 points OUTOFSERVICE.
Syntax: OUTOFSERVICE (POINT 1, POINT 2,… POINT 16)
Example: OUTOFSERVICE (ROOM TEMP, OA TEMP)
INSERVICE
The INSERVICE command removes the manual override of an input point initiated by
the OUTOFSERVICE command.
Syntax: INSERVICE (POINT 1, POINT 2,… POINT 16)
Example: INSERVICE (ROOM TEMP, OA TEMP)