User Guide

Chapter 2 - BACnet Field Panel Web Server System Administration
Prerequisites and Browser Requirements for BACnet Field Panel Web Server
13
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
Chapter 2 - BACnet Field Panel Web Server
System Administration
Chapter 2 discusses the following topics:
● Prerequisites and Browser Requirements for BACnet Field Panel Web Server
[➙ 13]
● Prerequisites for FINlite Graphics Tool [➙ 14]
● Enabling or Disabling Web Server [➙ 15]
● Loading the User Interface [➙ 16]
● Performance and Limitations [➙ 18]
● Network Configuration - IP Address [➙ 21]
● System Security [➙ 21]
● Language Support [➙ 22]
Prerequisites and Browser Requirements for BACnet Field
Panel Web Server
Prerequisites
Before using the BACnet Field Panel Web Server User Interface, be sure to verify that:
● The panels being accessed by BACnet Field Panel Web Server User Interface use
Firmware 3.2.3 or later.
– Firmware Revision 3.2.3 must be loaded using FLT 3.11 SP1 or later
● Appropriate licenses are installed. See the
License Manager Start-up Procedures
(145-600) for more information on licenses.
● The panels have Web Server enabled through the HMI.
– Panels are Web Server enabled by default starting with Firmware 3.2.5.
● The browser requirements below are met.
● The latest revision of the UI is installed to ensure full compatibility with the latest
firmware features.
For more information, see the
Loading the User Interface [➙ 16] and Login Page
[➙ 23] sections, and the
APOGEE BACnet ALN Field Panel User's Manual (125-3020).
Browser Requirements
● An Internet browser that supports Adobe Flash Player Plug-in Version 25.0.0.x or
later, such as Microsoft Internet Explorer (IE) 9, 10 or 11, Edge 25 or later,
Chrome, or Mozilla Firefox.