User Guide

Chapter 10 - Create/Edit
Event Enrollment
114
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
● The Notification Class drop-down menu allows you to choose the notification class
that the Event Enrollment Object will use. If no Notification Class is specified, no
panels will be notified.
Type-specific Parameters:
● The
States list displays the available alarm values. This parameter applies to COS
Event Enrollment Object types only.
● The
Feedback Point drop-down menu provides the object reference for the
feedback from the object to be monitored. This parameter is required for creating
an Event Enrollment Object and cannot be edited. This parameter applies to FAL
Event Enrollment Object types only.
● The
Set Point drop-down menu provides the object reference for the setpoint. This
parameter is required for creating an Event Enrollment Object and cannot be
edited. This parameter applies to LIM and OOR Event Enrollment Object types
only.
● The
High Diff Limit and Low Diff Limit fields allow you to set the differential limit
from the setpoint. These parameters apply to LIM Event Enrollment Object types
only.
● The
High Limit and Low Limit fields allow you to set object’s high and low limit
alarm values. These parameters apply to OOR Event Enrollment Object types only.
● The
Deadband field allows you to set the deadband value to determine normal
alarm parameters. This parameter applies to LIM and OOR Event Enrollment
Object types only.
Tips for Using the Event Enrollment Editor
● If the Event Enrollment object is not configured as alarmable, it will not be counted
in fault counts even if the object is in fault status.
Using Event Enrollment Objects
Creating an Event Enrollment Object
1. Click the Event Enrollment icon from the Create/Edit bar.
 The
Event Enrollment Editor window displays.
2. Click Select a Panel at the top of the left pane of the Event Enrollment Editor
window to display available panels.
3. Select the desired panel by clicking the panel name in the left pane of the Event
Enrollment Editor window.
4. Click the + button at the bottom left of the Event Enrollment Editor window.
 The Event Editor window displays a new Event Enrollment object.
5. Enter the new Event Enrollment object information.
6. Click Save.
 The
Save button becomes grayed out once the modifications are complete.