User Guide

Chapter 10 - Create/Edit
Schedule/Command/Calendar Object Editors
108
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
Start/Stop Time Optimization (SSTO)
When the
Schedule Optimization Enabled check box is selected:
● The 12 default SSTO Action Titles are added to the
Action list (see table below).
● The + and - buttons of the
Action list are grayed out.
● You can add commands to the action.
● You cannot change the name of the actions. The
Action Title field in the Actions
dialog box is grayed out.
Index
Action Title
Description of “State”
1
VAC
Actions for vacant (unoccupied) time
periods
2
OCC1
Actions for 1st occupied time period
3
OCC2
Actions for 2nd occupied time period
4
OCC3
Actions for 3rd occupied time period
5
OCC4
Actions for 4th occupied time period
6
OCC5
Actions for 5th occupied time period
7
WARMUP
Early start time actions used to heat the
zone to occupied setpoint
8
COOLDOWN
Early start time actions used to cool the
zone to occupied setpoint
9
NGHT_HTG
Night time actions for controlling heating
10
NGHT_CLG
Night time actions for controlling cooling
11
STOP_HTG
Early stop time actions used when in
heating
12
STOP_CLG
Early start time actions used when in
cooling
When you save the Command object:
● The
Schedule Optimization Enabled checkbox is grayed out.
● The Command Object is saved to the field panel.
Viewing a Command Object
1. Click the Command icon from the Create/Edit bar (hover over the Schedule icon to
view it).
 The Command Object Editor window displays.
2. Click Select a Panel at the top of the left pane of the Command Object Editor
window to display available panels.
3. Select the desired panel and the desired command object by clicking the panel
name and then the command object name.