User Guide

Chapter 10 - Create/Edit
Schedule/Command/Calendar Object Editors
107
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
Deleting a Schedule Object
1. Click the Schedule icon from the Create/Edit bar.
 The Schedule Editor window displays.
2. Click Select a Panel at the top of the left pane of the Schedule Editor window to
display available panels.
3. Select the desired panel and the desired schedule by clicking the panel name and
then the schedule object name.
 The Schedule Editor window displays the schedule object details.
4. Click the - button at the bottom left of the Schedule Editor window.
A message box will display, allowing you to verify deletion of the selected schedule
object. Click
Yes to delete the selected object.
Using the Command Object Editor
Creating a Command Object
1. Click the Command icon from the Create/Edit bar (hover over the Schedule icon to
view it).
 The Command Object Editor window displays.
2. Click Select a Panel at the top of the left pane of the Command Object Editor
window to display available panels.
3. Select the desired panel by clicking the panel name in the left pane of the
Command Object Editor window.
4. Click the + button at the bottom left of the Command Object Editor window.
 The
Command Object Editor window displays a new command object.
5. Enter the new command object information (Object Name, Object Identifier,
Description).
6. Select the Schedule Optimization Enabled check box to enable SSTO. See the
Start/Stop Time Optimization (SSTO) section.
7. Click the + button at the bottom left of the Command Object Editor window to add
an action to the command object.
8. Click the new action to add a title in the Action Title field, and to add point
information.
– Click the + button to add rows to the Action table.
– Click each cell in the new row to add Point, Value, Priority, and Quit on Failure
information.
9. Click Save.
 The
Save button becomes grayed out once the modifications are complete.