User Guide

Chapter 1 - Introduction to BACnet Field Panel Web Server
Compatibility
10
Siemens Industry, Inc.
BACnet Field Panel Web Server User Guide
125-3584
2017-07-31
Compatibility
See the following compatibility chart for the minimum firmware revision required to fully
support each revision of FINlite, the FPWeb UI, and APOGEE Editor.
BACnet Field Panel
Web Server
Firmware Revision
a)
FINlite
Revision
UI/Launch Pad
Revision
b)
FPWeb UI for
Desigo® CC™
APOGEE Editor
Revision
c)
FIN Builder
Revision/
Connector
3.5
1.5.14
1.5.14
1.5.14
1.0.0.17
3.0.235/1.5.6
3.4
1.4.39
1.4.39
1.4.39
1.0.0.17
3.0.235
3.3.1
1.3.102
1.3.102
N/A
1.0.0.17
3.0.003
3.3
1.3.40
1.3.40
N/A
1.0.0.17
N/A
3.2.5
1.2.35
1.2.35
N/A
1.0.0.17
N/A
3.2.4
1.1.0.2638
1.1.0.143
N/A
1.0.0.17
N/A
3.2.3
1.1.0.2638
1.1.0.130
N/A
N/A
N/A
a)
It is recommended that you change the default passwords for the HIGH and MED accounts before upgrading to Firmware Revision
3.3 or later.
b)
Support for editing points and PPCL programs on FLN devices is provided in Firmware Revisions 3.3 and later.
c)
Used in conjunction with the Desigo® CC™ management station.
Applications
BACnet Field Panel Web Server includes all the applications a facility operator needs
to easily configure, monitor, and control the APOGEE® Automation System through a
simple web-based user interface.
NOTE:
In the Web Server user interface, it is recommended to limit the total number of
graphic tabs and dynamic trend tabs that are open to six (6) for performance reasons.
Status Bar Reports
Provides the ability to view reports of various conditions.
Point Commander
● Shows details for a selected point.
● Allows commanding of point values and priorities, and disabling of points.
● Provides navigation to the trending application.
● Allows totalization of point values.
Graphics
Allows you to display/view the graphics that have been created and published to the
panel using the Siemens FINlite graphics utility program.