User Guide

Using the Installer
6 | 9
Siemens Industry, Inc.
User Guide
145-1008
2017-07-30
Using the Installer
The Installer is available from Standard Apps/Partner Extranet.
NOTICE
Be sure you are using the appropriate version of the Installer.
The 32-bit Installer can only be used on 32-bit computers, and the 64-bit Installer can
only be used on 64-bit computers.
1. Double-click the Installer file (APOGEE ALN Tools.msi).
The APOGEE ALN Tools Setup wizard displays.
2. Follow the installation prompts until the Custom Setup screen displays.
3. On the Custom Setup screen, select which files you want installed.
4. Click Browse to navigate to where all the applications will be installed.
 The Reset button returns the Custom Setup screen to its default setting (all
files will be installed).
NOTE:
The Installer defaults to the following file locations:
• For Windows 7, 64-bit:
C:\Program Files (x86)\SIEMENS\
5. Click the Disk Usage button to display the amount of hard drive memory the
installation will require.
6. Click OK.
7. Click Next to continue the installation.