Installation Instructions
Document No. 553-503
Installation Instructions
August 13, 2009
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and
models as design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective
owners. © 2009 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
USA
Your feedback is important to us. If you have comments
about this document, please send them to
SBT_technical.editor.us.sbt@siemens.com
Document No. 553-503
Printed in the U.S.A.
Page 2 of 2
PXC-16 and PXC-24
PXC-36 (direct connect, no cable required).
3. Insert the lower two cover tabs into the slots
located at the bottom of the PXC Compact
cover opening.
4. Push the upper prong into the upper slot.
The installation is now complete.