User Guide

FIN Builder Graphics Tool

Using the FIN Builder Graphics Tool

Siemens Industry, Inc.

Kiosk Mode User Guide

A6V10455247

Building Technologies

2017-06-30

CAUTION

FIN Builder Shuts Down Automatically

If this installation of FIN Builder starts to run and then shuts down automatically, you

may need to delete the FINSiemensLibrary.flb file in the

Network folder from the AIR

cache:

1. Exit

FIN Builder.

2. Navigate to: C:\Users\<

YourUserFolder>

\AppData\Roaming\com.j2inn.FinBuilde

\Local Store\system\

Network.

3. Locate and delete the

FINSiemensLibrary.flb file.

4. Start

FIN Builder.

5. Install the Siemens Connector.

Viewing Siemens Connector Revision Graphic

With Siemens Connector build 1.5.1 or later, the Siemens Connector Revision graphic

files are included in the Application MC deployment or from the Partner Extranet site.

Previous releases of the Siemens Connector do not support the Siemens Connector

Revision object. If a prior version of build 1.5.1 of FINSiemensLibrary.flb is found in the

Drive B:\FIN directory, the Siemens Connector Revision graphic displays the revision

string as grayed text.

To view the Siemens Connector Revision information from FIN Builder or from the field

panel, use the corresponding procedure.

Viewing from FIN Builder

 FIN Builder is open.

1. From the Misc directory of each field panel device, select Siemens Connector

Revision object and then drag to the Mapping & Equipment pane.