User Guide

Application MC

Accessing Application MC

Siemens Industry, Inc.

Kiosk Mode User Guide

A6V10455247

Building Technologies

2017-06-30

Application MC Prerequisites

● The

Description field in the properties for each FLN device is properly configured.

For more information, see the procedure

Setting up the Description Property using

WCIS

[➙ 75].

● Application MC files are deployed to the field panel from the

Tools menu of Launch

Pad.

Accessing Application MC

The Application MC graphic is hosted on the USB memory storage device, which is

plugged into the USB port (Drive

B) of a field panel, and displayed using one of the

supported browser applications [➙ 52]. To display Application MC, do the following:

1. Open a supported Web browser on the computer.

2. Type one of the following in the Address field:

– IP address of the field panel.

– Field panel node name/Fully Qualified Domain Name.

NOTE: The browser must be configured to ignore the proxy settings for the panel

names and/or IP addresses. See the

Appendix A - Troubleshooting and Error

Management

[➙ 77] section for more information.

If this is the first time the field panel has been accessed through a browser,

the

End User License Agreement (EULA) page displays. Click the Accept

button to accept the EULA.

⇨

Field panels that host FPWeb UI and Application MC provide a user

interface (Landing Page) for selecting whether to display Application MC

or enter the FP Web UI.

⇨

Field panels that host only Application MC and/or FINBuilder graphics will

display the

If the Landing Page displays, click the Kiosk icon.