User Guide

FIN Builder Graphics Tool
Troubleshooting
49
Siemens Industry, Inc.
Kiosk Mode User Guide
A6V10455247
Building Technologies
2017-06-30
5.
Click a thumbnail to display that graphic. If only one graphic exists, it will
display automatically.
NOTE:
Thumbnails are created during publication by FIN Builder. See the
Saving and
Publishing a Project
section of this document. If you manually delete a thumbnail
image, the project must be republished in order to recreate the thumbnail.
NOTE:
Kiosk Mode does not support FINlite graphics.
6.
Click the Logoff button to properly close the graphic.
NOTE:
To properly log off of the field panel and close Web sessions, a Logoff button must be
added to each graphic. See the
Logoff Management section for instructions on how to
add a Logoff button to a graphic.
Troubleshooting
FIN Builder graphics display with an UNLICENSED watermark.
● The field panel hosting the displayed graphic does not have an FPWEBPLHST
license installed.
● Any component on the displayed graphic is bound to a point in a field panel (or its
FLN devices), which does not have an FPWEBPL or FPWEBPLHST license
installed.
● The field panel hosting the displayed graphic has a Firmware Revision earlier than
3.3.
● Any component on the displayed graphic is bound to a point in a field panel (or its
FLN devices) with a Firmware Revision earlier than 3.3.
● No components on the displayed graphic are bound to a point in the host field
panel.
See the
License Manager Start-up Procedures (149-703) for more information on
licenses.