User Guide

FIN Builder Graphics Tool

Using the FIN Builder Graphics Tool

Siemens Industry, Inc.

Kiosk Mode User Guide

A6V10455247

Building Technologies

2017-06-30

16. Name the component.

17. Click Save and save to the Models folder.

Publishing a Project (Graphic)

Graphics, referred to in FIN Builder as FIN Builder Project files (.finp), must be

published to Drive B on the field panel.

NOTE:

Multiple users publishing to the same panel at the same time is not recommended;

this may reduce PPCL performance and may cause publication to fail.

NOTE:

Before transferring a file to a field panel, you must verify that enough RAM is

available in the field panel to hold the entire file or it cannot be transferred to its final

location.

To publish a graphic to the field panel:

1. From the File menu, select Publish.