Manualshelf

User Guide

ManualsBrandsSiemens ManualsBuilding automationAPOGEE Wiring Guidelines for Field Panels and Equipment Controllers
31323334353637383940
FIN Builder Graphics Tool
Using the FIN Builder Graphics Tool
34
Kiosk Mode User Guide
A6V10455247
2017-06-30
3. Drag the appropriate components onto the graphic canvas. In the following
example, three gauges are being used.
4. Drag and drop the points from the Mapping pane and bind them to the graphical
component that is being relativized.
5. Repeat Step 4 for all points.
6. Click the Relativize to drop-down arrow at the top of the Mapping pane and then
select the device that contains the points you dropped into the Mapping pane in
Step 2.
A drop-down list displays.
7. Use the checkmarks to the right of the points to select all the points that you want
to relativize, or deslect all the points that you do not want to relativize.
8. Click the blue checkmark in the upper right corner to indicate that you are done.
The
Mapping window displays the relativized points.