User Guide

FIN Builder Graphics Tool
Using the FIN Builder Graphics Tool
27
Siemens Industry, Inc.
Kiosk Mode User Guide
A6V10455247
Building Technologies
2017-06-30
Figure 9: Changing the Background Color of a Label - Adding a Shape to the Graphic.
2. Add a Label Component to your graphic.
3. Bind it to the desired device point. In our example, we are using an FLN device
point AOV1.
4. Center the Label in the Rectangle.
Figure 10: Changing the Background Color of a Label - Binding the Label Component to the
Device Point.
5. Select the Rectangle. Bind the same point to the Fill property as you have bound to
the Label.
Figure 11: Changing the Background Color of a Label - Binding the Point to the Fill Property.
6. From the drop-down menu at the bottom of the screen, select Status to Simple.