User Guide

FIN Builder Graphics Tool

Using the FIN Builder Graphics Tool

Siemens Industry, Inc.

Kiosk Mode User Guide

A6V10455247

Building Technologies

2017-06-30

Figure 8: Degrading a Gauge Component - Adjusting the Gauge Display when the Point is

Failed.

NOTE:

Any value can be selected for the

Fault state. However, a low value, such as 15%, is

recommended so that the failure or other condition is evident to the user.

7. Leave the other Alpha level options unchanged and click the Apply button.

8. Repeat this procedure for all bound components that you want to display as

degraded when the point (or device) they are bound to fails.

Example 3: Changing the Background Color of a Label

In this example, the background color of a Label is set to change color of when the

device containing the point bound to that component point is Failed.

1. Add a shape to your graphic.

 In this example, we are adding a rectangle, which will be the background for

your label.

 The Stroke Color of the rectangle has been set to Alpha

0 so that the rectangle

does not have a border.