User Guide

FIN Builder Graphics Tool

Using the FIN Builder Graphics Tool

Siemens Industry, Inc.

Kiosk Mode User Guide

A6V10455247

Building Technologies

2017-06-30

Figure 6: Degrading a Gauge Component - Binding the Point to the Alpha Property.

4. Select the Alpha property.

5. From the drop-down menu at the bottom of the screen, select Status to Simple.

Figure 7: Degrading a Gauge Component - Selecting Status to Simple for the Alpha Property.

 The menu to adjust the Alpha level options for each status is displayed.

6. To degrade the Gauge to 15% Alpha when the point goes into a Failed state,

select the slider for Fault and drag it to an Alpha setting of 15.00.