User Guide

FIN Builder Graphics Tool
Using the FIN Builder Graphics Tool
19
Siemens Industry, Inc.
Kiosk Mode User Guide
A6V10455247
Building Technologies
2017-06-30
4. Select Alarms as the point to refresh.
5. Save and publish the graphic.
 The Alarm Data will be refreshed at the rate configured in the Timer Interval
property.
FLN Discovery (Navigation) Data
FLN Discovery data includes a list of FLN devices that have been added to the host
panel database, and have a properly formatted description property (see the
Application MC section for more information). This data is provided primarily for use in
Application MC to populate the Navigation Tree component; however, it can be used to
populate the Navigation Tree component in a custom FIN Builder graphic, as well.
Devices that have not yet been added to the field panel database will not be displayed
in the Navigation Tree.
These data can be bound to a Navigation Tree component.
Designing Your Graphic to Support Object Failure and
Other Status Indications
FIN Builder, in conjunction with the Siemens Connector, provides a visual indication
that a failure has been detected by degrading (fading) components on a graphic if
either of the following is true:
● The graphic contains components that are bound to points on a device that is
Failed when the graphic is opened.
● The device hosting your graphic fails after the graphic is opened.