User Guide

FIN Builder Graphics Tool

Using the FIN Builder Graphics Tool

Siemens Industry, Inc.

Kiosk Mode User Guide

A6V10455247

Building Technologies

2017-06-30

Adding an Alarm Grid Update Timer

1. Select the Timer component from the Controls palette and add it to your graphic.

You may want to place the component close to the Alarm Grid for readability.

The Timer will not be visible once the graphic is published.

2. In the Timer Properties, do the following:

– Change the Name of the Timer to

ALARM_GRID_TIMER.

– Verify that

AUTO_START is selected.

– Change the

INTERVAL to 60 seconds.

3. Select the Timer component, click the plus button to add a new Action, and

then select Timer > Refresh Point.