Manualshelf

User Guide

ManualsBrandsSiemens ManualsBuilding automationAPOGEE Wiring Guidelines for Field Panels and Equipment Controllers
70717273747576777879
Application MC
FLN Device and Network Set-up
76
Kiosk Mode User Guide
A6V10435686
2017-06-30
5. Open the ApplicationMC_Mapping.xml file with your preferred text/XML editor.
6. In the XML file, navigate to the desired
[Applicatio]>
element.
7. Update the ApplicationGuide property to the name of your customized Application
Notes file. In this example, Application Note APP_13000_PDF.PDF has been
added to the DOCS folder and the mapping file has been changed to use that
Application Note for Application 13000.
8. Save the XML file to the FIN folder in the USB drive.
9. Put the USB drive back into the field panel.
FLN Device and Network Set-up
In order to create the hierarchy of the Application MC Navigation Tree, the FLN device
description properties must be configured in a specific way. This section describes the
format required for the description properties and outlines how to change the change
the description to use a different control diagram.
Setting up the Description Property using WCIS
The hierarchy of the Navigation Tree is determined by the
Description field of the FLN
device. This field must be configured using WCIS. The
Description field can contain up
to 60 alphanumeric characters There must be no spaces in the text of each segment
and each segment must be separated by a period, whether or not there is content in
the segment.. All spaces will be replaced with underscores and must be formatted as
follows:
D1.D2.D3$#
Where:
●
D1 is the first segment of the Description property is required. At a minimum, the
Description string must contain: D1..
● All segments (
D1, D2, D3) must be represented, but the optional fields do not need
to contain content.
●
(Optional)
D2