User Guide

FIN Builder Graphics Tool
Using the FIN Builder Graphics Tool
37
Siemens Industry, Inc.
Kiosk Mode User Guide
A6V10435686
Building Technologies
2017-06-30
9. Publish the graphic to the host panel.
10. Using a Web browser, connect to the host panel.
11. From the Landing Page, select Kiosk and open the graphic you just published.
12. Verify that selecting the Logoff button returns you to the Landing Page.
Creating a Logoff Button Model
To create a
Logoff button that returns you to the Landing Page:
1. Place a Button component from the Controls Palette on the canvas.
2. Modify the properties of the Button component to fit the needs of your graphic (that
is, Up/Over/Down color, Up/Over/Down label, corner style, etc.).
3. Select the + button in the Mapping pane to create a local Boolean point.
4. In the properties of this point, do one of the following :
– Add a name to the
UITAG field (for example, LogOffButton) and click the check
mark icon to save.
– Click the speech bubble icon to the right of the
UITAG field to open a UITAG
dialog box.
Enter the content and click the Apply button.